DitoGear™ Omnislider
Performance and reliability
DitoGear™ OmniSlider, our flagship product since 2010 is a high-performance workhorse for studio and outdoor use. Gathering users feedback across the years allowed us to improve the details, but its design principles remained unchanged and hold well against the time.
Available Controllers
As every other DitoGear™ motion control device, OmniSlider can be used with any of our motion controllers, ranging from battlefield-tested OmniController to state-of-the-art multiaxis wireless Evolution.
Buy now
Features
Live-action mode
Time-lapse mode
Stop-motion mode
High-end durable build
Simple setup
Great precision
Utmost payload and stability
Perfect repeatability
Noise-free
High-speed range
Various controllers
Low power consumption
Dragonframe compatibility*
Range of accessories
Versatile mounting options
*depending on a controller
What is included?
| OmniSlider | OmniSlider Servo | OmniSlider Animators Servo | OmniSlider Animators Stepper |
|---|---|---|---|
| OmniSlider Servo | |||
| OmniSlider Stepper | |||
| OmniSlider Tripod Adapter Plate | |||
| OmniSlider Push by Hand | |||
| Controller | |||
| OmniController with 1/4″ Mounting Plate | |||
| DragonBridge Interface | |||
| Power&Cabling | |||
| RJ45 Signal Cable | |||
| BreakOut Box | |||
| AC/DC Power Adapter | |||
| Power Pack 14Ah w/ Battery Charger | |||
| Shutter Release Cable (C3) |
Buy now
Specifications
| Products | Omnislider Servo | Omnislider Stepper |
|---|---|---|
| Motor Unit | Servo | Stepper |
| Horizontal operation payload | 70kg (154.3lb) | 30kg (66.1lb) |
| Upright operation payload | 10kg (22lb) | 3.5kg (7.7lb) |
| Underslung | 25kg (55lb) | 25kg (55lb) |
| Minimum speed | no limit | no limit |
| Positioning precision2 | 0.1 mm = 10 000 steps/m | 0.1 mm = 10 000 steps/m |
| Operation temperature range | -25°C to 45°C | -25°C to 45°C |
| Power supply | 11.4V – 14.4V DC | 11.4V – 14.4V DC |
| Power Consumption (Stand-by mode) | 0.2A | 0.8A |
| Power Consumption (Horizontal operation, diagonal or vertical operation downwards) | 1.5-3.5A | 2.2A |
| Power Consumption (Upright operation) | 2A | 2.5A |
| Features | ||
| Available lengths | 1.0m / 1.5m / 2.0m / 2.5m | 1.0m / 1.5m / 2.0m / 2.5m |
| Backlash | Yes3 | No |
| Safe operation on power cutoff | Yes | No |
| Smooth operation for realtime filming | Yes | No |
| Usable for sound recording on a set | Yes4 | No |
| Internal motor controller anti-overload protection w/ reset button on a chasis | Yes | No |
| Recommended focal length of the camera | up to 70 mm | up to 70 mm |
1 Using high speeds with DitoGear™ OmniSlider Stepper is possible with V2 firmware, but may be unreliable.
2 In a Stop Motion mode.
3 Backlash compensation is possible with DitoGear™ Evolution or DitoGear™ DragonBridge & Dragonframe software.
4 Allows for working w/ sound on a set in normal conditions with moderate operation speeds. The slider may get loud on highest speeds.
Dimensions & weights
| Product | Travel length [mm] | Total length [mm] | Width [mm] | Total height [mm] | Slider height [mm] | Weight [kg] |
|---|---|---|---|---|---|---|
| OmniSlider 1.0m | 1 033.00 | 1 298.00 | 70.00 | 120.00/200.00* | 42.00 | 7.6 |
| OmniSlider 1.5m | 1 513.00 | 1 780.00 | 70.00 | 120.00/200.00* | 42.00 | 10.1 |
| OmniSlider 2.0m | 2 033.00 | 2 300.00 | 70.00 | 120.00/200.00* | 42.00 | 11.1 |
| OmniSlider 2.5m | 2 513.00 | 2 780.00 | 70.00 | 120.00/200.00* | 42.00 | 12.4 |
