DitoGear™ Modulo

 

 

Extreme portability

Easily disassemble Modulo dolly and take it into your carry-on luggage. With less than 7kg of total kit weight, Modulo can accompany you wherever you go!


Extensible track

Adding track to Modulo dolly is simple and affordable. All you need is a pair of 1m steel rods and a support/spreader – all together less than 1.5kg/m. For heavy-duty operation or extreme precision applications you may need to double the amount of spreaders/supports.


Various controllers

As every other DitoGear™ motion control device, you can use Modulo with any of our motion controllers, ranging from OmniController to our state-of-the-art multiaxis wireless Evolution.


Low power consumption

Modulo runs off any 12DC power source. Whether it is an included 7Ah gel type battery, your favourite 3rd party professional video power source or even a set of AA Accus, you will be amazed with power efficiency of this slider.

 

 

 

Buy now

Features


 

  • Extreme portability
  • Time-lapse mode
  • Various controllers
  • Modular design

  • Custom configuration
  • Live-action mode
  • Low power consumption

  • Extensible track
  • Stop-motion mode
  • High level repeatability


Compare all Sliders


Specifications


 

General specifications  
Min speed: 1m/450 days in timelapse mode
Max speed: 5cm/s in Dolly A configuration or 120° on the motor shaft1
Positioning precision: 0.1mm = 10 000 steps/m
Track lengths: 1m to 5m recommended for motorized configurations
Operation temperature range: -25°C to 45°C
Payload (unmotorized): 25kg
Payload (motorized): 25kg in horizontal operation mode, 6.5kg in vertical operation mode2
Power supply: 11.4V – 14.4V DC
Avg. current draw: 0.5A (at 12V DC)
Max. current draw: 1.1A (at 12V DC)
Battery operating time (7Ah kit battery)3: up to 14h

 

1 Max speed depends on the controller used and type/size of the drive wheel.
2 It is possible to increase the payload to 13 kg in vertical operation mode by adding the second servo motor unit.
3 Average working time under average payload, on a fully charged kit battery.

 

 

 

 

Learn more about DitoGear™ controllers

 

 

Drive wheel options
Ground/frition-based drive wheel
Rope pulley wheel
Geared traction belt wheel

 

 

Dimensions and weights
Modulo Dolly A, 1m kit: below 6 kg
Servo motor unit: 1250 g
1m track (pair of rods): 1350 g
7Ah Battery: 151 × 65 × 95 mm, 2750 g
Parts weights  
Accessories & cabling 0.8 kg
OmniController 0.3 kg
DitoGear™ Evolution 0.8 kg
7Ah Power Pack incl. charger 2.8 kg
Servo motor unit 1.25 kg
Track (1m, pair) 1.35 kg
Spreader 0.25 kg
End-block 0.25 kg
Bearing block + frame 0.65 kg
Trolley (full kit) 1.5 kg
Support feet (1pcs) 0.3 kg
Drive wheel under 0.1 kg

 

 

 

Buy now

Downloads




Acessories




Videos