DitoGear™ BD Slider



Extreme portability

So large on location, so small in your luggage. Easily disassembled BD Slider suits to your carry-on luggage. With less than 5kg of total kit weight BD Slider can be taken easily to the most remote locations!

Various controllers

As every other DitoGear™ motion control device, BD Slider can be used with any of our motion controllers, ranging from battlefield-tested OmniController to state-of-the art multi-axis wireless Evolution.

Low power consumption

BD Slider runs off any 12V DC power source. Whether it is a 7Ah gel type battery or your favourite 3rd party professional video power source, you will be amazed with impressive power efficiency of this beauty.




Buy now




  • Extreme portability
  • Uncompromised precision
  • Various controllers

  • Time-lapse mode
  • Live-action mode
  • Stop-motion mode

  • High-level repeatability
  • Low power consumption

Compare all Sliders

What is included?



1 Including: Servo motor, base plate, trolley & linear bearings
2 Choice of 0.6 / 1.0 / 1.5m
3 DitoGear™ Power Pack 7Ah and DitoGear™ PowerBrick 17Ah Li-ion are not included in BD Slider bundles.



Some of the image photographs on the DitoGear™ website may show the BDSlider with 3rd party accessories, such as camera, lenses, supports, quick release plates and similar, which are not supplied in the kit. Depending on your cameras and working style you may want to add a range of 3rd party accessories to get the most of the DitoGear™ motion control rig. Please refer to the table above to understand what’s supplied.





General specifications
Min speed no limit
Max speed 5cm/s
Positioning precision 0.1mm = 10 000 steps/m
Power supply 11.4V – 14.4V DC
Avg. current draw 0.35A (at 12V DC)
Max. current draw 1.1A (at 12V DC)
Payload w/ steel rods (unmotorized) 25 kg (55 lb)
Payload w/ steel rods (motorized)  25 kg (55 lb) in horizontal operation mode, 4.5 kg (9.9 lb) in vertical operation mode
Track non-modular, 16mm stainless steel, 0.6m to 1.5m
Operation temperature range -25°C to 45°C





Learn more about DitoGear™ controllers



Dimensions and weights
BD Controller bundle w/ 1.0m steel rods  below 6.0 kg (13.2 lb)
Servo motor unit2 31 x 10 x 7 cm, 2 kg (4.4 lb)
1m track (pair of steel rods) 2.6 kg (5.7 lb)
Part weights
BD Controller 0.15 kg (0.3 lb)
OmniController 0.35 kg (0.8 lb)
End blocks 0.85 kg (1.9 lb)
PowerBrick 15Ah Li-ion1 1.15 kg (2.5 lb)
7Ah Power Pack incl. charger1 2.8 kg (6.2 lb)
Servo motor unit2 2.0 kg (4.4 lb)
Cable Kit (1 Axis) 0.2 kg (0.4 lb)
RJ45 cable 0.1 kg (0.2 lb)


1 DitoGear™ Power Pack 7Ah and DitoGear™ PowerBrick 17Ah Li-ion are not included in BD Slider bundles. It is possible to purchase it additionally or use a 3rd party adapter that meets the requirements detailed in specifications table.
2 Including: Servo motor, base plate, trolley & linear bearings




Buy now