DitoGear™ DryEye Pro has been designed to prevent dew condensation or freezing of the camera lenses during long-term shooting in humid or low temperature conditions.

The controller is powered using 12V DC and may be connected to the DitoGear™ OmniSlider power source via Power Splitter or to any other 12V DC power source.
It can control 3 different heaters independently. The maximum temperature is around 40°C so it is completely safe for the optics and strong enough to prevent dew condensation or lens freezing.

The DitoGear™ Dry Eye Pro main advantage, comparing to manually controlled DitoGear™ Dry Eye Lite,  is an automatic temperature offset control. This unit has a built-in temperature, pressure and humidity sensors and therefore it is able to automatically calculate the dew point and keep the optics temperature at the desired offset above the dew point to prevent dew condensation and lens freezing with minimal power consumption.

Bundles:

1. Economy: 1x Controller, 1x Heater (35cm), 1x Power Cable
2. Standard: 1x Controller, 1x Heater (35cm), 1x Power Cable, 1x Transport Soft Case
3. XL2: 1x Controller, 2x Heater (35cm), 1x Power Cable, 1x Transport Soft Case
4. XL3:1x Controller, 3x Heater (35cm), 1x Power Cable, 1x Transport Soft Case