DitoGear OmniSlider
Order nowDitoGear OmniSlider Technical Specifications
Servo motor version
- Working speeds:
min: 1m/450 days in timelapse mode
max: 1m/3.85s in video mode - Positioning precision in StopMotion mode:
0.1mm = 10 000 steps/m - Working track lengths:
0.5m (1.64ft) to 2.5m (6.5ft) - Operation temperature range:
-25°C to 45°C - Workload:
70kg in horizontal operation mode
12kg (15kg2) in vertical operation mode - Power supply: 11.4V – 24V DC
- Current draw:
0.3A – 4A (at 12V DC) - Battery operating time
~ up to 40h (low payload, horizontal operation)
~ up to 12h
(estimated opertaion time in mixed mode & average payloads)
~ 2-3h
(under maximum workload, vertical operation, upwards)
Stepper motor version
- Working speeds:
min: 1m/450 days in timelapse mode
max: 1m/8s in video mode (1m/3.85s1) - Positioning precision in StopMotion mode:
0.1mm = 10 000 steps/m - Working track lengths:
0.5m (1.64ft) to 2.5m (6.5ft) - Operation temperature range:
-25°C to 45°C - Workload:
up to 30kg in horizontal operation mode
3.5kg in vertical operation mode - Power supply: 11.4V – 14.4V DC
- Current draw:
0.8A – 1.4A (at 12V DC) - Battery operating time
~ 3h in video mode
~ 10h in time-lapse and stop-motion mode
Controller User Interface
- Precise 4-directional, 1-button joystick control
- Speed dampening dial
- Max speed dial
- High resolution backlit LCD Display
Dimensions and weights
- For the OmniSlider dimensions please refer to the table below.
- OmniSlider Controller:
106(75) x 187 × 50 mm, approximately 600g - OmniSlider Battery: 151 × 98 × 95 mm, 3597 g
OmniSlider – Dimensions & Weight
| Product model | Travel length [mm] |
Total length [mm] |
Width [mm] |
Total height [mm] |
Slider height [mm] |
Weight [kg] |
| OmniSlider 0.5m | 513.00 | 780.00 | 70.00 | 127.00/220.003 | 42.00 | 5.8 |
| OmniSlider 1.0m | 1 033.00 | 1 300.00 | 70.00 | 127.00/220.003 | 42.00 | 7.6 |
| OmniSlider 1.5m | 1 513.00 | 1 780.00 | 70.00 | 127.00/220.003 | 42.00 | 10.1 |
| OmniSlider 2.0m | 2 033.00 | 2 300.00 | 70.00 | 127.00/220.003 | 42.00 | 11.1 |
| OmniSlider 2.5m | 2 513.00 | 2 780.00 | 70.00 | 127.00/220.003 | 42.00 | 12.4 |
1 Using high speeds with DitoGear™ OmniSlider Stepper is possible with V2 firmware, but may be unreliable
2 On your own risk
3 Servo motor version
