Join Us On Facebook

Special Deals

Get your prices on DitoGear™ equipment.
Leave your email to known about special deals.

DitoGear™ OmniSlider

Order now

Recommended OmniSlider accessories

OmniSlider Push by Hand mode

DitoGear™ OmniSlider Push by Hand mode allows to operate the DitoGear™ OmniSlider manually and it’s available as an upgrade for all older units. Since March, 2014 it’s an integral part of the OmniSlider kit.

OmniSlider Accessory Holder

DitoGear™ Accessory Holder allows to mount various accessories to the OmniSlider rail saving your priceless pair of hands in everyday on-set activities. 2×1/4″ and 1×3/8″ female thread. Since November 6th, 2015 every DitoGear™ OmniSlider comes with DitoGear™ OmniSlider Accessory Holder.

Magnetized OmniSlider 3/8″ Head Adapter Plate

The OmniSlider 3/8 Head Adapter Plate is magnetized since April, 2013. Just snap the BreakOut Box to make all the cable management so much easier.

One unit comes in the kit with the slider (since April 2013). For all users of the older equipment it’s available as an upgrade

OmniSlider Support Feet Pro

DitoGear™ Support Feet Pro may be used to stabilize the slider when working on the ground level as well as help to fix the slider on the shoot when working diagonally or vertically in various situations.

Double Head Adapter Plate

DitoGear™ Double Head Adapter plate allows for using 2 HDSLR or compact video cameras with DitoGear™ OmniSlider.


DitoGear™ Wedge allows to mount the camera or DitoGear™ OmniHead at an angle of 0-90º on DitoGear™ sliders and 3rd party hardware. The base of the DitoGear™ Wedge has 3/8″ Inch female non-threaded hole plus four additional holes for mounting it to OmniSlider permanently. The top includes a bubble level and 3/8″ and 1/4″ Inch female non-threaded holes. Since 8th of May, 2014 it’s included in every Evolution Multi-axis Motion Control Kit.

  • Payload: 30kg (66.1lbs)

Quick Release Plate

DitoGear™ Quick Release Plate lets you work faster and more efficiently. It will help you to mount your OmniHead to the OmniSlider securely. The large contact surface makes the DitoGear™ Quick Release Plate wiggle free and firmed.

Strap Accessory Holder

DitoGear™ Accessory Holder allows to mount various accessories primarily to the OmniSlider housing, but also to any other objects saving your priceless pair of hands in everyday on-set activities. Ideal for mounting DitoGear™ Evolution or DitoGear™ DragonBridge on the OmniSlider motor housing. Since November 6th, 2015 DitoGear™ Strap Accessory Holder comes with DitoGear™ Evolution, DragonBridge and PowerBrick.

Available in two lengths to match different  accessories sizes.

12V to 8.2V DC power adapter for Canon 5D/7D

The DitoGear™ 12V to 8.2V power adapter kit lets you connect the Canon DSLR Camera such as 5D MKII, MKIII, 7D or other cameras using LPE6 battery to any 12V DC power source. Comes in various packages, optionally with a modified Canon coupler.

OmniSlider Alu Transport Case

The DitoGear™ Alu Transport Case is suitable for DitoGear™ OmniSlider Servo as well as Stepper.

Dimensions & weights:

  • 1.0m – 136.5 cm x 34 cm x 18 cm; 7.25 kg (16 lbs)
  • 1.5m – 186.5 cm x 34 cm x 18 cm; 11.7 kg (26 lbs)
  • 2.0m – 239.5 cm x 34 cm x 18 cm; 14.9 kg (33 lbs)
  • 2.5m – 288.5 cm x 34 cm x 18 cm; 17.7 kg (39 lbs)

Check Other DitoGear Products