Join Us On Facebook

Special Deals

Get your prices on DitoGear™ equipment.
Leave your email to known about special deals.

Buyers guide

The idea of this guide is to help you choose the right equipment set for your job and also give some guidelines and answers to most commonly asked questions regarding the ordering process and DitoGear™ equipment.

Ordering and shipping
I have an important shooting tomorrow / in a few days. If I order today how fast can you get the slider to me?

We do not recommend buying the equipment in rush.

The legal order terms require that we ship within 30 days from the payment clearance date. Normally, most orders are dispatched within 3-4 days from the date of the payment clearance. Shipping is 3-4 days (economy) or 1-2 days (priority). 2.5m slider units need more time to ship.

Take into account possible shipping delays and customs clearance time. It also happens that parcels arrive damaged or incomplete – its not our fault, but we need time to fix it. Add some time to check if the parcel arrived in good condition and reserve some time for setting it up, testing and learning.

Again, we do not recommend buying the equipment in rush. Once you have decided to go for it, we’ll make our best to help you get it on time. But please don’t blame us if something goes wrong.

How long does it take to ship my order to XYZ
  1. The legal order terms require that we ship within 30 days from the payment clearance date. Normally, most orders are dispatched within 3-4 days.
  2. PowerBox 75 is available on backorder and lead time is ~3-4 weeks.
  3. Shipping to most locations is 3-4 days (economy) or 1-2 days (priority) unless it is 2.5m slider.
  4. DitoGear™ OmniSlider 2.5m units can only be shipped w/ freight carrier and therefore takes usually up to 7 days. It costs approximately USD 800.00 to US and Australia and ~ EUR 400-500 in Europe and on the continent.
How much is shipping to XYZ

Shipping costs depend on your location and the goods you order. To get an estimate:

  1. Use the shipping calculator in the box to the right at www.ditogear.com/store.
  2. You can also sign up for the store account, add products to cart and proceed to checkout – the shipping costs will be calculated for you if possible.

Typical shipping costs:

  1. Small items, such as accessories or controllers are usually about EUR 35.00 – 60.00 to Europe and about USD 50.00 – 100.00 to US (Fedex Economy).
  2. If shipping costs are NOT calculated automatically, you will be contacted by DitoGear™ staff and instructed how to pay them.
  3. DitoGear™ OmniSlider + Transport case or DitoGear™ OmniHead/ LensDrive is usually about EUR 50.00 – 100.00 to Europe and about USD 100.00 – 150.00 to US.
  4. DitoGear™ OmniSlider 2.5m units can only be shipped w/ freight carrier and therefore takes usually up to 7 days. It costs approximately USD 800.00 to US and Australia and ~ EUR 400-500 in Europe and on the continent. The 2.5m units may only be shipped with the Alu Tranpsort case. So unless you are really sure you need a 2.5m unit, it is recommended that you get a 2.0m version.
Payments, taxes, customs and billing
Can I pay with my XYZ credit card?

Yes, you can pay using your credit card in our online store.

In order to pay with your credit card, choose PayPal option during checkout. You will be redirected to PayPal payment interface where you can either pay with your PayPal account or use so called “Express Checkout” which does not require having PayPal account, just the credit card. Please note that the availability of express chceckout option as well as its name may vary depending on the country.

PayPal accepts almost any type of payment including most of credit cards. The other payment option is regular wire transfer.

I have issues paying with PayPal

There might be a few reasons for issues with PayPal payments.

In most cases when issues occur, you will get the problem explanation from PayPal. Proceed according to that.

In some cases the following message may be shown or sent to you: “The transaction cannot complete successfully. Instruct the customer to use an alternative payment method.” In such case it is mostly related to your credit card and you need to check the following:

  1. Make sure your PayPal account or credit card is enabled for Internet transactions and international payments. You may need to contact your bank for this.
  2. Make sure that there is no legal limit of outbound international PayPal payments in your country. Check this with PayPal.
  3. Make sure that your credit cards limits are sufficient to commit payment

Recommendations:

In case you had first PayPal payment failure, it is recommended that you place an order choosing bank wire as a payment option. That way the order won’t be lost in case of payment issues and you will be able to pay with PayPal anyway after placing it.

VAT charges and exclusions

The VAT at local 23% rate is added to the order total in the following cases:

  1. For all orders on behalf of companies resident in European Union excluding companies with a registered EU VAT number.
  2. For all orders on behalf of individual persons or companies based in Poland.
  3. For all other orders in case of personal pickup in Poland.

The order is eligible for VAT exclusion only in the following cases:

  1. The order is placed on behalf of a person/company based outside the EU AND it is shipped outside of EU.
  2. You are based in EU, you have a registered and valid EU VAT number AND you have provided it during checkout / registration. Check this page to verify your EU VAT number.

The VAT can not be excluded if:

  1. You’re based in Poland.
  2. You’re based in EU and you only have a local VAT number. Check this page to verify your EU VAT number.
  3. You’re based in EU, and just applied for the EU VAT number, but it was not valid on the date of purchase.
  4. You provided us with the EU VAT number AFTER the order was placed and the invoice issued.
  5. You are based outside of EU, but you’re picking up goods personally in Poland. In this case there are chances you may get the VAT refund at your country after the customs clearance is made, but we need to charge it.

VAT is ALWAYS added to shipping charges.

See Terms and Conditions for more details.

Customs duties and import charges
  1. All customs duties or import charges are due to the buyer of the equipment and are NOT included in the shipping fees.
  2. Customs duties may vary depending on the country. Please check it with your local authorities prior to ordering.  Customs duties are usually ~5% of the order total plus some handling fees in case when Fedex or UPS does paperwork and clearance for you. However, there are countries where they may be up to 50% of the order total.
  3. There are countries where there are serious total value limits on the import of goods for individual persons (for example USD 1000.00 mark for individuals in Russian Federation). Please make sure the order total does not exceed these limits.
  4. No, we can’t underdeclare, send goods as a gift or anything like that.

See Terms and Conditions for more details.

Returns in result of customs clearance problems or pickup issues

Please note that in case when the goods were shipped to you and returned for any of the following reasons, you have to cover the costs of shipping the goods to you and also cover the return costs. The above refers to the following situations:

  1. Goods that were not picked up in time from the courier
  2. Goods that can’t be delivered as a result of wrong shipping address you provided
  3. Goods that have been rejected by customs for any reasons. You are responsible for checking if the goods can be legally imported to your country before placing the order.

Usually in case of 1 & 2 we inform you about any issues upfront and it happens rarely. See Terms and Conditions for more details.

Warranty and returns
What's the warranty for DitoGear Products

All DitoGear™ products purchased online have a 1-year (one year) limited warranty. Post-warranty support is also provided.

What happens if my equipment fails?

Hardware failures are very rare with our equipment. Electronics failures happen from time to time, but are more and more rare since the products and OmniControllers especially are already matured and refined.

In case of failure, contact our support to get the problem solved quickly.

Before you contact us:

  1. Make sure you have read and use the equipment according to User Manuals
  2. Make sure you have checked Troubleshooting guide in the User Manual (if applicable)
  3. Prepare all basic information about your equipment, such as: order date and number, equipment type, model and serial numbers, detailed description of the failure.
  4. Prepare all detailed information required to reproduce the problem (if applicable) or at least understand it. Note down all your DitoGear™ equipment setup settings, let us know about your camera and camera mounting.

To obtain support and get the repair/replacement:

  1. Contact our support team
  2. Send the details as described above
  3. Proceed according to the instructions given by our staff.

Worth knowing:

  1. In most cases issues may be solved remotely.
  2. Some repairs may be done on your own with a bit of our support and DIY approach.
  3. If something needs to be shipped it is usually the electronics or motor units. Main hardware never needs to be shipped over.
  4. If you ship the stuff for repair or replacement according to our guidelines the procedure is fast, easy and inexpensive.
  5. You are required to cover shipping costs to DitoGear™, we cover shipping back to you w/ Fedex or UPS Economy. If you’re short on time, we may ship it using Priority courier provided that you cover the price difference.
Returns policy

You are allowed to return any products within 7 days from the date of delivery. Full price of the products will be refunded, but you are required to deliver goods in perfect shape and cover shipping costs 2-way. See Terms and Conditions for details.

Renting, trying out, testing
I live in XYZ. Do you have any dealerships nearby?

No, we don’t have the dealer/reseller/distributor in your country, but you may order online in our store and the goods will be shipped to your location.

At DitoGear™ one of the main goals is to provide top quality products at reasonable prices. Therefore we (and you) can’t afford traditional sales and distribution models where often 50% of the product retail price goes to resellers, dealers and distributors. Selling direct allows us to keep prices reasonable and use best available components to produce the equipment.

In case you’re interested in trying out the gear first, please check our Rental Network and see if there are any user rentals available near your location.

Check also the DitoGear group on Vimeo and get in touch with DitoGear equipment users.

I would like to try the product before I buy. Can I rent it somewhere?

We’ve sold a lot of sliders to almost all countries in the world and many of our customers signed up for Rental Network. Please feel free to contact them, ask about their experience and rental options.

Check also the DitoGear group on Vimeo and get in touch with DitoGear equipment users.

DitoGear™ controllers
How many controllers do I need for…
  1. The following DitoGear™ controllers are capable of controlling only one axis at time: OmniController, SmoothWheel, BD Controller
  2. Current versions of the OmniControllers can be synchronized for playback using sync port and SyncSpider. Older OmniControllers may be upgraded by adding a sync port.
  3. Trito is a 3-axis realtime operation controller for multiaxis configurations.

Check Controllers Overview.

What are control options for DitoGear™ multi-axis equipment configurations

Essentially there are 4 options for controlling DitoGear™ equipment in multiaxis configurations:

    1. With multiple OmniControllers (real time, timelapse, stop motion, motion recording & playback, w/ sync capability),
    2. With a 3-axis Trito controller (realtime operation only)
    3. With DitoGear™ DragonBridge Interface from DZED Dragonframe software (stop-motion, timelapse, limited speed real time operation, keyframe based motion programming)
    4. With DitoGear™ Evolution software package and multi-axis motion control interface (live action, stop-motion, timelapse, keyframe based motion programming). Currently DitoGear™ Evolution runs on Android 10″ tablets with resolution of 1280×800 and Android 4.x.

Check Controllers Overview.

What is the difference between DitoGear™ DragonBridge and DitoGear™ DMC-16 Adapter?

DitoGear™ DragonBridge & Dragonframe software may be used for shooting stop motion and timelapse. Learn more at: ditogear.com/controllers/dragon-bridge/

DitoGear™ DMC-16 Adapter + DMC-16 Controller & Dragonframe – Real time, Timelapse & Stop motion operation modes are supported. Learn more at: ditogear.com/controllers/dmc-16-adapter/

DitoGear™ Evolution Motion Control Kit Questions
What is the difference between the 3-, 4- and 5-axis Evolution Motion Control Kit?

The main difference is hardware included in the kit:

  1. 3-axis bundle comes with the chosen slider (OmniSlider Servo or T’rantula GO) and DitoGear™ OmniHead (pan and tilt motorized head).
  2. 4-axis kit includes the slider of your choice (OmniSlider Servo or T’rantula GO), OmniHead and one LensDrive Unit that serves as a focus or zoom drive.
  3. 5-axis bundle includes OmniSlider Servo or T’rantula GO plus OmniHead and two LensDrives.
What is the difference between T’rantula GO Evolution Motion Control Kit & OmniSlider Evolution Motion Control Kit?

Each kit comes with a different DitoGear™ slider: T’rantula GO or OmniSlider Servo.
Key differences between DitoGear™ T’rantula GO and OmniSlider Servo:

  1. DitoGear™ OmniSlider is bulky and heavy duty, DitoGear™ T’rantula GO is lightwieght and portable.
  2. DitoGear™ OmniSlider is faster, holds higher payloads. DitoGear™ T’rantula GO is slower, lower payloads.
  3. DitoGear™ T’rantula GO can be extended and disassembled. DitoGear™ OmniSlider comes in one piece.
  4. DitoGear™ OmniSlider has a monorail design. DitoGear™ T’rantula GO – double rail with spacing of 23cm.

Check out the details at ditogear.com/sliders-overview/

What is the difference between PLUS and STANDARD bundle?

The basic difference lies in additional controllers and transport cases included in Plus version.

DitoGear™ Evolution Motion Control bundles are described in details at:

What is the maximum payload of the Evolution Motion Control Kit?
DitoGear™ OmniSlider Questions
What OmniSlider length you recommend?

It’s a tough question. It all depends on your applications and shooting style. Certainly, there are 2 best-selling lengths: 1.5m and 2.0m.

Let’s have a look ad some advantages of all lengths:

  • DitoGear™ OmniSlider 1.0m
    The most portable version. Can be set up easily by a single person, you may use it with a single heavy duty tripod, but 2 lightweight tripods are recommended. Can be taken into the plane as a check in luggage, but you may be required to pay extra for bulky luggage. DitoGear™ OmniSlider 1.0m Servo + Transport Case + Battery is about 18 kg. Dimensions are 135 x 26 x 18 cm.
  • DitoGear™ OmniSlider 1.5m
    The best selling length. A great compromise between portability and versatility. The length with the transport case is 185 cm and can fit in larger cars as well.
  • DitoGear™ OmniSlider 2.0m
    The 2nd best selling length. Very versatile length, usable both in studio as well as outdoor landscape shooting. 230 cm length with the transport case.
  • DitoGear™ OmniSlider 2.5m
    This is a HUGE unit. Really. Almost 3m with a transport case makes it difficult to put into most of the cars. Shipping is also much more expensive (freight only) and takes more time. Go for it for studio work or for outdoor shooting if you have a decent team to carry it around and you’re sure you need it. But sometimes this length really makes a difference – you may put it across a small river in the middle of the forest, hang across the monument in the old town or do a lot of creative stuff like that. Lot of fun.
What accessories do you recommend?

First, make sure you are familiar with what comes with the OmniSlider Kit, then, let’s have a look at what’s essential.

Getting started!

Definitely you should think about the Support Feet Pro, an OmniSlider Accessory Holder and a Transport Case. Don’t miss the Shutter Release Cable. One of them comes free of charge, but you may get some extra depending on your cameras. Along with the OmniSlider Kit, it makes a nice starting point.

Multiple cameras?

Ok, you’re shooting mainly timelapses with multiple cameras on the slider or some on the slider and other static?

Let’s add: Double Camera Adapter Plate, more Shutter Release Cables and a signal splitter.

External monitors or other devices?

Very often you’ll be using an external camera monitor. Why not power it from the main OmniSlider Power Pack? What you need is a Power Splitter Type B.

Dew prevention during timelapse shoots

In case you’re shooting a lot of timelapse in the nighttime or in cold/humid conditions you may consider either the DitoGear™ DryEye Lite or DitoGear™ DryEye Pro. It is a controller and heaters system that prevents dew condensation or lens freezing during shoots in demanding conditions. The DitoGear™ DryEye May be powered from the same battery as a slider or any other external source. When coupling it to the slider battery you’ll need the Power Splitter Type B. DitoGear™ DryEye Lite is sufficient and does the job, but Pro version has also automatic dewpoint calculation basing on the temperature and humidity sensors. And a slick user interface.

More power for your camera

If you’re shooting a lot with a 5D, 7D or any other camera using LPE6 battery, wouldn’t it be cool to power it from the slider battery too? We got a solution for that. Check this adapter to extend your live action or timelapse shooting sessions. Not only it drops voltage from 12V do 8.2 required by Canon, but also it does the job in the most efficient way possible (over 85% efficiency rate).

Check all recommended accessories.

Can DitoGear™ OmniSlider be operated manually?

DitoGear™ OmniSlider Push by Hand mode allows to operate the DitoGear™ OmniSlider manually.

Check out the video tutorial.

What is the difference between OmniSlider Servo and Stepper

The difference between the DitoGear™ OmniSlider Servo and Stepper is explained on this page: ditogear.com/products/omnislider/servo-versus-stepper/

What is the maximum payload of the OmniSlider?

DitoGear™ OmniSlider Servo:

  1. Horizontally – up to 70kg
  2. Vertically – up to 12-15kg
  3. Slopoed – between 15 and 70kg depending on the slope angle.
  4. If you’re planning on using it with a heavy camera, you’ll additionally have to consider stability. The DitoGear™ OmniSlider is rather a compact unit, so to make it work properly with a heavy camera you’ll need to stabilize it properly. Also, using a compact rig and placing the load as low as possible, close to the track improves the performance.

For the DitoGear™ OmniSlider Stepper:

  1. Horizontally – up to 30kg
  2. Vertically – up to 4kg
  3. Slopoed – between 4 and 30kg depending on the slope angle.
  4. DitoGear™ OmniSlider Stepper is not recommended for live action filming due to movement granularity generated by the stepper motor which may result in image artifacts.
I use XYZ camera. Is the slider compatible?
There are 2 aspects of compatibility.

  1. The first one is whether you can place your camera on the slider or not – see question above.
  2. The other is shutter control which is an optional feature used in drive-shoot-drive mode, continuous timelapse mode as well as stop motion. Currently we support shutter control of most models of Canon, Nikon and Panasonic GH1/GH2 DSLR cameras as well as RED Epic and Red One.

The list of all available Shutter Release Cables is available at: ditogear.com/store/power-cabling/160-ditogear-shutter-release-cable.html.

Is the slider loud? Can I record sound nearby?
  1. The DitoGear™ OmniSlider Servo is a quiet unit and you may easily work with sound nearby provided that you operate at low to average speeds range. With really fast movements (above 70% of speed setting) it may become loud and it may be difficult to record sound nearby.
  2. The DitoGear™ OmniSlider Stepper is rather not recommended for the film work and for working with the sound on the set. At higher speeds in video mode the slider is quite loud so it rather wont be possible to record sound nearby.

Check OmniSlider Servo Audio Tests

Can I upgrade DitoGear™ CrankSlider to OmniSlider?

Yes, most versions of the DitoGear™ CrankSlider are upgradeable to DitoGear™ OmniSlider. Only a few units from the first batches can’t be upgraded easily. Please find the upgrade here: ditogear.com/store/upgrades/42-ditogear-omnislider-servo-unit-upgrade.html

Can I attach DitoGear™ MiniJib on DitoGear™ OmniSlider?

Installing the MiniJib on a single footprint DitoGear™ OmniSlider can cause some inertia issues so it’s not recommended by DitoGear™.

What is the difference between OmniSlider Servo and T’rantula HD?

Key differences:

  1. They hold different payloads. DitoGear™ OmniSlider Servo: 70kg (horizontal operation), 12kg (vertical), 25kg (underslung). T’rantula HD: 100kg (horizontal), 9kg (vertical), 30kg (underslung).
  2. DitoGear™ OmniSlider has a monorail design. DitoGear™ T’rantula HD – double rail with spacing of 41cm.
  3. DitoGear™ OmniSlider comes in one piece. DitoGear™ T’rantula HD can be extended and disassembled. You can make T’rantula HD 4m or even longer and still the longest part of this dolly is one meter long what makes it truly portable.

Check out the sliders overview at: ditogear.com/sliders-overview/

DitoGear™ T’rantula Questions
What is the difference between T’rantula GO and T’rantula HD?

Key differences:

  1. They hold different payloads. T’rantula GO: 35kg (horizontal operation), 4.5kg (vertical), 15kg (underslung). T’rantula HD: 100kg (horizontal), 9kg (vertical), 30kg (underslung).
  2. The diameter of the T’rantula GO rods is 15mm and the spacing between the rails – 23cm. T’rantula HD rods are 30mm; as for the spacing – it’s 41cm.
  3. Weight:
    T’rantula GO 1.0m – 4.3kg; T’rantula GO 2.0m – 6kg
    T’rantula HD 1.0m – 13kg; T’rantula HD 2.0m – 18kg

Can I attach the motorized MiniJib on T’rantula GO or HD?

Yes, it’s possible to install the motorized MiniJib on DitoGear™ T’rantula GO or HD.
The double rail design makes possible to avoid some inertia issues.

DitoGear™ Modulo Questions
What is the difference between Modulo Dolly and OmniSlider

Key differences:

  1. DitoGear™ OmniSlider is bulky and heavy duty, DitoGear™ Modulo is lightwieght and portable.
  2. DitoGear™ OmniSlider is faster, holds higher payloads. DitoGear™ Modulo is slower, lower payloads and has a limited work in vertical operation mode*.
  3. DitoGear™ Modulo is modular, can be extended, disassembled and reconfigured in a multitude of configurations. DitoGear™ OmniSlider comes in one piece.

* It is possible to increase the payload twice in vertical operation mode by adding the second servo motor unit.

What is the difference between Modulo Dolly A and Modulo Dolly B

There are three main differences between DitoGear™ Modulo Dolly A and DitoGear™ Modulo Dolly B

Servo Motor Unit position

  1. DitoGear™ Modulo Dolly A has got the motor unit attached to one of the End Blocks.
  2. DitoGear™ Modulo Dolly B has got the motor unit attached underneath the Trolley Base.

Available lengths

  1. Modulo Dolly A: 1.0 m and 2.0 m
  2. Modulo Dolly B: from 1.0 m to 5.0 m*

Traction Belt length

  1. Modulo Dolly A configuration requires twice traction belt length as compared to the dolly length.
  2. Modulo Dolly B needs the same traction belt length as the dolly length.

Please check DitoGear™ equipment user manuals for more details.
* The unmotorized Modulo Dolly maximum length is undefined.

What is the difference between Modulo dolly and T’rantula GO?

Key differences:

  1. They hold different payloads. DitoGear™ T’rantula GO: 35kg (horizontal operation), 4.5kg (vertical). Modulo: 25kg (horizontal), 6.5kg (vertical).
  2. DitoGear™ T’rantula GO can be operated underslung. Maximum payload is 15 kg. As for the Modulo – that’s not possible.
  3. T’rantula GO is very easy to assemble and it takes only a few minutes. In case of the Modulo – it consists of many parts that need to be connected together; the set up process is more time-consuming and sophisticated, especially in demanding conditions.
DitoGear™ OmniHead Questions
What is the maximum payload of the OmniHead?
  1. Pan axis payload – 12 kg (26 lb)
  2. Tilt axis payload – 6 kg (13 lb)

Can I use the OmniHead with camera XYZ?

There are 2 aspects of compatibility:

  1. The first one is whether you can place your camera on the OmniHead or not – see question above.
  2. The other is shutter control which is an optional feature used in drive-shoot-drive mode, continuous timelapse mode as well as stop motion. Currently we support shutter control of most models of Canon, Nikon and Panasonic GH1/GH2 DSLR cameras as well as RED Epic and Red One. Triggering the camera is possible with one of the following controllers – DitoGear™ Evolution or OmniController.

The list of the Shutter Release Cables is available at: ditogear.com/store/

Can I control my camera is 360 degrees in each of axes?

Yes, that’s possible. Check out the maximum dimensions of the camera at: ditogear.com/products/omnihead/specifications/

DitoGear™ MiniJib Questions
What is the difference between motorized and manual MiniJib?
  1. Manual MiniJib consists of the MiniJib Arm attached to the Manual Operation Add-on.
  2. Motorized MiniJib is affixed to DitoGear™ OmniHead. It’s possible to attach the second OmniHead Unit to MiniJib Camera Adapter Plate.

Can I use the motorized MiniJib with DitoGear™ slider?

Yes, it’s possible to install the MiniJib on one of the following double rail sliders:
DitoGear™ T’rantula GO or T’rantula HD.

Installing the MiniJib on a single footprint DitoGear™ OmniSlider can cause some inertia issues so it’s not recommended by DitoGear™.

Can I use the motorized MiniJib for live action shooting?

DitoGear™ MiniJib is fully usable for time-lapse cinematography and stop-motion animation. Real-time motorized operation is also possible at slow speeds, but due to inertia issues it is not recommended by DitoGear™.

DitoGear™ Spinn360 Questions
Is the Spinn360 loud? Can I record sound nearby?

The DitoGear™ Spinn360 is rather not recommended for the film work and for working with the sound on the set. At higher speeds in video mode the turntable is quite loud so it rather won’t be possible to record sound nearby.

DitoGear™ batteries
What is the difference between DitoGear™ Power Pack and PowerBrick batteries?
  1. DitoGear™ Power Pack is a gel type lead acid battery. We offer DitoGear™ Power Pack in two capacities:
    Power Pack 7Ah
    Power Pack 14Ah
  2. PowerBrick is a lithium-ion battery; truly portable and lightweight battery.
    Learn more at: ditogear.com/products/powerbrick/

What is DitoGear™ PowerBox?

DitoGear™ PowerBox 75 is a high-capacity, 9-channel and 2 USB regulated DC power supply for DitoGear™ devices and 3rd party equipment capable of delivering maximum 20A current at capacity of up to 75Ah and output voltages up to 12V.

Learn more: ditogear.com/products/powerbox/