Join Us On Facebook
Get your prices on DitoGear™ equipment.
Leave your email to known about special deals.
DitoGear™ XY Module contributes to performance of DitoGear™ VibraFreek under extreme conditions such as high speeds, wind or rough terrain.
DJI Ronin Mounting Adapter enables attaching a DJI Ronin gimbal to DitoGear™ VibraFreek Vibration Dampening Arm.
DitoGear™ DJI Ronin Mounting Adapter Plate is necessary to attach the DJI Ronin Mounting Adapter to DitoGear™ XY Module.
BeStedy Mounting Adapter allows attaching a BeStedy gimbal to DitoGear™ VibraFreek Vibration Dampening Arm.
DitoGear™ VibraFreek HD Springs enable to increase the VibraFreek payload to 38 kg (83.78 lb).
VibraFreek Counterweight Set 2.5kg enhances the quality of results obtained when shooting with lighter cameras.
DitoGear™ VibraFreek Mounting Rods enable mounting the VibraFreek with a Spider Mount to a car’s bullbar.
Table Top Wraps for DitoGear™ Spinn360
DitoGear™ Spinn360 Table Top with multiple mounting holes. Since November, 2015 it’s an integral part of the Spinn360.
DitoGear™ OmniSlider Push by Hand mode allows to operate the DitoGear™ OmniSlider manually and it’s available as an upgrade for all older units. Since March, 2014 it’s an integral part of the OmniSlider kit.
DitoGear™ Accessory Holder allows to mount various accessories to the OmniSlider rail saving your priceless pair of hands in everyday on-set activities. 2×1/4″ and 1×3/8″ female thread. Since November 6th, 2015 every DitoGear™ OmniSlider comes with DitoGear™ OmniSlider Accessory Holder.
The OmniSlider 3/8 Head Adapter Plate is magnetized since April, 2013. Just snap the BreakOut Box to make all the cable management so much easier.
One unit comes in the kit with the slider (since April 2013). For all users of the older equipment it’s available as an upgrade
DitoGear™ Support Feet Pro may be used to stabilize the slider when working on the ground level as well as help to fix the slider on the shoot when working diagonally or vertically in various situations.
DitoGear™ Double Head Adapter plate allows for using 2 HDSLR or compact video cameras with DitoGear™ OmniSlider.
DitoGear™ OmniController SyncSpider provides you perfect synchronization of motion recording and playback when using multiple OmniControllers.
DitoGear™ OmniController 1/4″ Mounting Plate enables to mount the OmniController on any accessories e.g. magic arm, tripod or head. Since November 6th, 2015 it comes with every DitoGear™ OmniController (purchased separately or in a bundle).
DitoGear™ Wedge allows to mount the camera or DitoGear™ OmniHead at an angle of 0-90º on DitoGear™ sliders and 3rd party hardware. The base of the DitoGear™ Wedge has 3/8″ Inch female non-threaded hole plus four additional holes for mounting it to OmniSlider permanently. The top includes a bubble level and 3/8″ and 1/4″ Inch female non-threaded holes. Since 8th of May, 2014 it’s included in every Evolution Multi-axis Motion Control Kit.
DitoGear™ Quick Release Plate lets you work faster and more efficiently. It will help you to mount your OmniHead to the OmniSlider securely. The large contact surface makes the DitoGear™ Quick Release Plate wiggle free and firmed.
DitoGear™ Accessory Holder allows to mount various accessories primarily to the OmniSlider housing, but also to any other objects saving your priceless pair of hands in everyday on-set activities. Ideal for mounting DitoGear™ Evolution or DitoGear™ DragonBridge on the OmniSlider motor housing. Since November 6th, 2015 DitoGear™ Strap Accessory Holder comes with DitoGear™ Evolution, DragonBridge and PowerBrick.
Available in two lengths to match different accessories sizes.
The DitoGear™ 12V to 8.2V power adapter kit lets you connect the Canon DSLR Camera such as 5D MKII, MKIII, 7D or other cameras using LPE6 battery to any 12V DC power source. Comes in various packages, optionally with a modified Canon coupler.
15mm Rods Adapter plate and 15mm x 20cm support rods for DitoGear™ OmniHead. Designed as a basic mounting option of the DitoGear™ LensDrive on the OmniHead.
Mod 0.8 gear pitch compatible with most lenses and follow focus equipment on the market.
Come in 2 sizes and with a set of spokes for mounting on various lens sizes.
Unlike most of the rings on the market, a special way of mounting to the lens allows for full 360°+ rotation.
The latest Geared Ring suitable for DitoGear™ LensDrive unit.
The DitoGear™ Alu Transport Case is suitable for DitoGear™ OmniSlider Servo as well as Stepper.
A ruggedized custom-made aluminum transport case designed for DitoGear™ OmniHead Bundles.
A ruggedized custom-made aluminum transport case suitable for DitoGear™ LensDrive Bundles.
The DitoGear™ SoftCase is suitable for DitoGear™ Modulo Dolly and the DitoGear™ BD Slider.
Dimensions & weights:
DitoGear™ PowerBrick SoftCase is suitable for DitoGear™ PowerBrick 11Ah Li-ion – a new DitoGear™ lightweight power solution.